Ei löytynyt haulla vielä M54 Moottoristen automaatin ohjelmoinnista mitään joten laitetaan tänne jokin aika sitten vastaan tullut linkki: https://www.tuningdb.info/alpina_b3s_flashes
Modet saa poistaa/siirtää jos löytyy jo ketju.
Klikinsäästäjä:
”..GS8.60.4, a lot of other BMW cars use this kind of TCU/EGS. Like all M54 engine based cars with automatic gearbox.
Tested and confirmed on E46, all other cars are currently untested.
Features of Alpina flash are:
better/faster shifting
shifting at higher rpm under full load
a way earlier closed torque converter clutch
a good manual mode (no S mode anymore)
it just drives more sporty!
...
What do you need for updating you TCU EGS to Alpina flash?
WinKFP working (with working GD8604 folder)
INPA compatible cable
You should also be a little familiar with WinKFP and ZUSBs already
HowTo update to Alpina using WinKFP
Download this flash file: (tiedosto ladattavissa alkup.sivulla)
Copy 'A7529033.0DA' to GD8604 folder, typically 'C:\EC-APPS\NFS\DATA\GD8604', overwrite the existing file
Open WinKFP, click Configuration and disable 'Test Checksum'
Now connect cable to your car
Click Comfort Mode/Komfort Modus, enter ZUSB/ZUSB eingeben
enter '7529032'
now continue with programming in WinKFP, after updating program (0PA) and data (0DA), you should be ready to go!
You may need to clear codes and reset adaptations in TCU/EGS
Have fun!”
Juttu jatkuu vielä alkuperäisellä sivulla. Itse en oo vielä testannut, ei oo kokemusta WinKFP käytöstä mutta ei tuo kovin vaikealta vaikuttanut. Nyt pitäisi vain löytää aikaa hommalle.
Modet saa poistaa/siirtää jos löytyy jo ketju.
Klikinsäästäjä:
”..GS8.60.4, a lot of other BMW cars use this kind of TCU/EGS. Like all M54 engine based cars with automatic gearbox.
Tested and confirmed on E46, all other cars are currently untested.
Features of Alpina flash are:
better/faster shifting
shifting at higher rpm under full load
a way earlier closed torque converter clutch
a good manual mode (no S mode anymore)
it just drives more sporty!
...
What do you need for updating you TCU EGS to Alpina flash?
WinKFP working (with working GD8604 folder)
INPA compatible cable
You should also be a little familiar with WinKFP and ZUSBs already
HowTo update to Alpina using WinKFP
Download this flash file: (tiedosto ladattavissa alkup.sivulla)
Copy 'A7529033.0DA' to GD8604 folder, typically 'C:\EC-APPS\NFS\DATA\GD8604', overwrite the existing file
Open WinKFP, click Configuration and disable 'Test Checksum'
Now connect cable to your car
Click Comfort Mode/Komfort Modus, enter ZUSB/ZUSB eingeben
enter '7529032'
now continue with programming in WinKFP, after updating program (0PA) and data (0DA), you should be ready to go!
You may need to clear codes and reset adaptations in TCU/EGS
Have fun!”
Juttu jatkuu vielä alkuperäisellä sivulla. Itse en oo vielä testannut, ei oo kokemusta WinKFP käytöstä mutta ei tuo kovin vaikealta vaikuttanut. Nyt pitäisi vain löytää aikaa hommalle.
:think
Comment