Linkkasin näemmä väärään videoon aloituksessa. Selvensin edittiin tuota, mutta sitä ei näemmä näkynyt. Kiitos

Warning! Danger of scalding! Only perform this work after engine has cooled down. |
Disconnect plug connections (1). Disconnect supply, return and fuel hoses. Loosen hose clamps (2). Detach water hoses (3) and fuel hose (4). |
Release screws or expansion rivets and remove floor trim. |
Loosen screws (1). Release pipe clamp (2). Separate exhaust pipe (3) from exhaust manifold (4). Move heater (5) in direction of arrow and remove. Installation: Replace rubber grommets if necessary. Top up coolant and vent cooling system. |
Comment