530dA E60:n automaattiloota?

[MRH]

Jep samaa vikaa esiintyy täälläkin, kierrokset hummaa edes takaisin siinä 1700 rpm kohdalla pintakaasulla. Eräs asentaja epäili, että hiukkassuodattimen aiheuttamalla vastapaineelle olisi jotain tekemistä "ominaisuuden" kanssa, asiantuntijat kertokoot kantansa.

Ulkomaan foorumeilla törmäsin tälläiseen kikkaan automaagin kanssa:
1. virrat päälle
2. kaasupedaali pohjaan n 30 sek ajaksi
3. Automaatin muisti nollautuu?

Tiedä onko tuosta mitään hyötyä, tässä linkki:

http://forums.e60.net/index.php?showtopic=40018&hl=reset

[viktor]

...................

[jaki]

Missä teetätit softapäivituksen? merkkihuollossako vai? laatikon softaa saa myös karalalta ainaskin.

Laakkosella tietysti, autoon siis ajettiin uusin CIP. Sitten varoitus: merkkihuolto ei anna mitään takuuta, että homma menee läpi; homma voi täysin varoittamatta pysähtyä johonkin boxiin ja siitä ei pääse eteenpäin muuten kuin vaihtamalla se uudemman firmiksen/hardiksen omaavaan. Ostaessani vajaat pari vuotta sitten Saksasta autoa, myyjäliike (BMW) teki siihen ennen luovutusta tuon CIP-päivityksen. Homma pysähtyi ja joutuivat vaihtamaan DDE:n. Onneksi ei mennyt minun piikkiin...Auto oli 12/03. Tämä uudempi on 3/04 ja siihen sai uusimman version mikä oli keväällä olemassa. Näin päivityksen login, siinä tuli herjaa useassa kohdassa, että jonkun boxin firmis ei ole up-to-date, mutta ne oli hypätty enterillä eteenpäin. Onneksi meni läpi ilman purkkien vaihtoa.
Vai Karalalta laatikkosoftaa jepu jep. Se varmaan on sitten oikein hyvä. Ei kai jengi ihan tosissaan näillä kyläsepillä ala autojaan päivittämään?

[poke]

Laakkosella tietysti, autoon siis ajettiin uusin CIP. Sitten varoitus: merkkihuolto ei anna mitään takuuta, että homma menee läpi; homma voi täysin varoittamatta pysähtyä johonkin boxiin ja siitä ei pääse eteenpäin muuten kuin vaihtamalla se uudemman firmiksen/hardiksen omaavaan. Ostaessani vajaat pari vuotta sitten Saksasta autoa, myyjäliike (BMW) teki siihen ennen luovutusta tuon CIP-päivityksen. Homma pysähtyi ja joutuivat vaihtamaan DDE:n. Onneksi ei mennyt minun piikkiin...Auto oli 12/03. Tämä uudempi on 3/04 ja siihen sai uusimman version mikä oli keväällä olemassa. Näin päivityksen login, siinä tuli herjaa useassa kohdassa, että jonkun boxin firmis ei ole up-to-date, mutta ne oli hypätty enterillä eteenpäin. Onneksi meni läpi ilman purkkien vaihtoa.
Vai Karalalta laatikkosoftaa jepu jep. Se varmaan on sitten oikein hyvä. Ei kai jengi ihan tosissaan näillä kyläsepillä ala autojaan päivittämään?

No ei tuo Laakkosenkaan touhu kuulosta kyläseppää kummemmalta, jos se kerran tuollasta on. Meillä ei täällä ole BMW-Laakkosta, joten päivitys olisi Hartikaisen hommia. Ko. pulju ei vaan ole minua vielä ammattitaidoillaan hirveesti vakuuttanut. Ehkä on vaan sattunut väärä asentaja??

Karalan lootasofta on ymmärtääkseni muokattu vastaamaan paremmin dieselmoottorin vääntöaluetta.

Ainakin minun mielestäni tehtaan softa on kuin bensiinimalliin olisi tehty. Kierrokset nousee aivan turhan ylös ennenkuin tomaatti vaihtaa isompaa (tämä siis SD-asennolla ja nilkka suorana kiihdytettäessä)

Ja voihan orggis-softan aina palauttaa, jos esim Karalan softa ei sattuisi miellyttämään.

[525TDS Touring]

Vai Karalalta laatikkosoftaa jepu jep. Se varmaan on sitten oikein hyvä. Ei kai jengi ihan tosissaan näillä kyläsepillä ala autojaan päivittämään?

Niin...Karalalla ja Harisella se ero merkkiliikkeen "erikoisosaajiin", että ne TIETÄÄ mitä ovat tekemässä, ja mitä heidän tekemät muutokset ohjelmiin käytännössä tekee. Merkkiliikkeessä luetaan lippuja ja lappuja ja sanotaan että näin, mutta käytännön kokemusta on todellisuudessa aika vähän. Lisäksi Karala ja Harinen muokkaavat ohjelmat autokohtaisiksi, mihin ei yksikään merkkiliike pysty.

[viktor]

.................

[jaki]

Niin...Karalalla ja Harisella se ero merkkiliikkeen "erikoisosaajiin", että ne TIETÄÄ mitä ovat tekemässä, ja mitä heidän tekemät muutokset ohjelmiin käytännössä tekee. Merkkiliikkeessä luetaan lippuja ja lappuja ja sanotaan että näin, mutta käytännön kokemusta on todellisuudessa aika vähän. Lisäksi Karala ja Harinen muokkaavat ohjelmat autokohtaisiksi, mihin ei yksikään merkkiliike pysty.

Ahaa, siis nuo kyläsepät tietävät paremmin kuin BMW AG :think ?
Eihän Laakkonen sinne mitään "omia" softia lataa, vaan yllämainitun tekemiä. Mietitköhän lainkaan mitä kirjoitit.

Ostaessani viimeisintä Münchenistä BMW Niederlassung:lta sanoivat ihan saman kuin Laakkonenkin, että eivät ala laittamaan uusia softia, jos auto toimii. Niin kuin toimikin. Laakkonen laitttoi tosiaan minun vastuulla uusimmat softat.

Tuo onkin mielenkiintoinen kysymys, jos joudutaan jokin boxi uusimaan (esim mennyt rikki tms). Silloinhan yleensä käsittääkseni homma aloitetaan sillä, että asennetaan uusin CIP ja sitten vasta aletaan tekemään koodaushommia. Entäs, jos tuo päivitys ei mene läpi?

[poke]

Ahaa, siis nuo kyläsepät tietävät paremmin kuin BMW AG :think ?
Eihän Laakkonen sinne mitään "omia" softia lataa, vaan yllämainitun tekemiä. Mietitköhän lainkaan mitä kirjoitit.

Ostaessani viimeisintä Münchenistä BMW Niederlassung:lta sanoivat ihan saman kuin Laakkonenkin, että eivät ala laittamaan uusia softia, jos auto toimii. Niin kuin toimikin. Laakkonen laitttoi tosiaan minun vastuulla uusimmat softat.

Tuo onkin mielenkiintoinen kysymys, jos joudutaan jokin boxi uusimaan (esim mennyt rikki tms). Silloinhan yleensä käsittääkseni homma aloitetaan sillä, että asennetaan uusin CIP ja sitten vasta aletaan tekemään koodaushommia. Entäs, jos tuo päivitys ei mene läpi?

on ihan selkeää, että merkistä riippumatta autonvalmistajat tekevät kompromisseja mm. moottorin ja laatikon ohjaussoftiin. Miksei joku asiaan erityisellä mielenkiinnolla vihkiytynyt voisi helpostikin löytää jotain paranneltavaa noihin ko. softiin?

Näinhän tekee mm. hartge, alpina, kelleners, jne...

Jos BMW AG on tehnyt softansa palvelemaan parhaiten suurimpia markkina-alueitaan ei se tarkoita että nuo ko. softat olisi viimeisen päälle hyviä tänne suomen tienopeuksille ja olosuhteisiin. Vai oletko sitä mieltä, että BMW AG:n intressi on tehdä softat juuri suomea/pohjoismaita varten eikä voluumimyyntialueelle?

summasummarum: jos joku haluaa asioida merkkihuoltojen kanssa, niin homma on puolestani ok, se on jokaisen oma valinta. Itse kuitenkin kallistun enempi räätälöidyn softan kannalle, olkoonkin se sitten mielestäsi vaikka "kyläsepän" tekemä.

[525TDS Touring]

on ihan selkeää, että merkistä riippumatta autonvalmistajat tekevät kompromisseja mm. moottorin ja laatikon ohjaussoftiin. Miksei joku asiaan erityisellä mielenkiinnolla vihkiytynyt voisi helpostikin löytää jotain paranneltavaa noihin ko. softiin?

Näinhän tekee mm. hartge, alpina, kelleners, jne...

Jos BMW AG on tehnyt softansa palvelemaan parhaiten suurimpia markkina-alueitaan ei se tarkoita että nuo ko. softat olisi viimeisen päälle hyviä tänne suomen tienopeuksille ja olosuhteisiin. Vai oletko sitä mieltä, että BMW AG:n intressi on tehdä softat juuri suomea/pohjoismaita varten eikä voluumimyyntialueelle?

summasummarum: jos joku haluaa asioida merkkihuoltojen kanssa, niin homma on puolestani ok, se on jokaisen oma valinta. Itse kuitenkin kallistun enempi räätälöidyn softan kannalle, olkoonkin se sitten mielestäsi vaikka "kyläsepän" tekemä.

Täysin samaa mieltä!!

[Evotec]

Miten nämä laatikot muuten kestää lastutusta? Käytetäänkö 535d:ssä ja 530d:ssä samoja laatikoita?

[Ricracing]

Tässä dataa laatikosta (osa 1):


VS-22 je Baugruppe/Group: 24
24 01 03 (040)
weltweit Datum/Date:
09/2003
6-speed automatic transmission
E60, E53
Introduction
The 6-speed automatic transmissions GA6HP19Z and GA6HP26Z have been jointly developed by BMW and ZF
(Zahnradfabrik Friedrichshafen). The 6-speed automatic transmission GA6HP26Z is already in service in the E65.
[System overview ...]
Both automatic transmissions are available as special equipment (option 205). The automatic transmissions are
paired to the engines as follows:
E60 engine and transmission
Engine GA6HP19Z GA6HP26Z
M54B22 X
M54B25 X
M54B30 X
N62B44 X
M57D30TU X
E53 engine and transmission
Engine GA6HP26Z
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 1 -
N62B44 Standard equipment
M57D30TU X
The two automatic transmissions differ in the following points:
•Different torque converter
•Clutches with different number of steel and lined plates
In order to absorb the higher torque of the N62B44 and M57D30TU engines, the automatic transmission
GA6HP26Z is of a more powerful design.
With the Steptronic, the automatic transmissions can also be shifted manually using the selector lever on the centre
console (no "shift-by-wire" as on the E65, but rather a mechanical connection).
Brief description of components
The automatic transmission consists of the following components:
- Torque converter with converter lockup clutch
The torque of the engine is transmitted to the automatic transmission in 2 ways:
1. Hydraulically via the torque converter
The torque converter transmits the torque from the engine to the transmission as follows: High engine
speeds and low engine torque are converted into low speeds and high torque.
2. Mechanically via the converter lockup clutch
When the converter lockup clutch is closed, the impeller and turbine wheel are non-positively linked
without the influence of friction. This prevents power loss within the torque converter and optimises fuel
consumption.
The converter lockup clutch ensures that a mechanical link is established between the output shaft of the
engine and the input shaft of the transmission. The opening and closing of the converter lockup clutch is
regulated in 1st to 6th gear.
Up to a transmission oil temperature of approx. 35 C, the converter lockup clutch is neither regulated
nor closed.
At other operating points, how the converter lockup clutch is regulated depends on other factors such as:
- Engine load
- Vehicle road speed
- Transmission oil temperature
- Selected shift program
- Oil pump
The oil pump is an internal gear pump. The torque converter drives the oil pump using the speed of the
engine.
The oil supplied by the oil pump has the following tasks:
•To cool the torque converter
•To lubricate the transmission
•To actuate the pistons in the transmission's multi-plate clutch
•To control the gearshifts
- Multi-plate clutches
The automatic transmission requires 5 multi-plate clutches to shift between the 6 gears: 3 input clutches
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 2 -
and 2 brake clutches. [more ...]
- Lepelletier planetary gear set
The automatic transmission is equipped with a Lepelletier planetary gear set. A Lepelletier planetary gear set
is a Ravigneaux set (double planetary gear set) with a single preceding planetary gear set. [more ...]
- Mechatronics module
The automatic transmission is controlled by the mechatronics module. The mechatronics module is a
combination of hydraulic unit and electronics module.
The hydraulic unit is the hydraulic section of the transmission control and regulates the valves (e.g. electronic
pressure control valves).
The electronics module contains the EGS control unit (EGS = electronic transmission control), the sensors and
the electrical connections within the transmission.
The mechatronics module is controlled from the selector lever as follows:
•Electrically: shift pulses from Steptronic
•Mechanically: parking lock, position switch
[more ...]
- Selector lever, drive positions and selector lever position displays
The selector lever has the positions
P for Park
R for Reverse
N for Neutral
D for Drive (= automatic mode)
M/S "M" for manual mode = Steptronic, "S" for Sport program = automatic mode with sporty map
Briefly pressing the selector lever to "-" in manual mode causes the transmission to shift down. Briefly
pressing it to "+" causes an upshift.
The selector lever position display is located in the selector lever trim. [more ...]
- Instrument cluster display
The selected drive position and transmission program are displayed in the instrument cluster (controlled by the
electronic transmission control).
> E60
Check-Control messages are displayed in the LC display as variable indicator lamps (red and yellow) in
the form of symbols. The following Check-Control messages can be shown:
•Transmission too hot or overheating (yellow or red indicator lamp)
•Selector lever position "P" not engaged (yellow indicator lamp)
•Emergency program, transmission fault (yellow or red indicator lamp)

[Ricracing]

Osa 2:

> E53
On the E53, the vehicle electrical system distinguishes between the "High" version and the "Low" version.
Only 2 warnings (overheating and emergency program) are displayed.
•Vehicle electrical system, "High" version
Warnings are only given with text.
•Vehicle electrical system, "Low" version
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 3 -
Warnings are only given with symbols.
- Check-Control messages in Central Information Display (CID) (E60 only)
The CID displays detailed information about the Check-Control messages in the instrument cluster.
The instrument cluster assumes control on these messages from the body CAN.
In addition to the visual display, the Check Control also alerts the driver with acoustic signals. Depending on
the importance of the associated message, a single or double gong with varying volume and tone will sound.
The instrument cluster controls these warnings by means of the K-CAN. The acoustic warnings are emitted by
the multi-audio system controller (M-ASK).
The electronic transmission control needs signals from the following components:
- Brake light switch
The signal from the brake light switch is needed for the function of the selector lever lock and the adaptive
transmission control.
- Accelerator pedal module
The signal from the accelerator pedal module is needed for the adaptive transmission control.
- Dynamic Stability Control (DSC)
The DSC optimises both driving stability when pulling away or accelerating and traction. Within the limitations
of the laws of physics, DSC compensates for driving conditions such as over/understeering. This is achieved
by signals concerning driving dynamics, e.g. wheel speed, lateral acceleration, vehicle speed, steering wheel
position being sent to the DSC control unit.
DSC transmits the processed signals regarding cornering, acceleration and winter identification to the EGS
control unit.
- Digital engine electronics (DME)/digital diesel electronics (DDE)
The transmission is actuated by the DME or DDE sending information about the engine's current operating
status (e.g. engine speed or torque) to the electronic transmission control (EGS).
The EGS in turn sends information about the current operating status of the transmission back to the DME or
DDE and intervenes as necessary in the actuation of the engine .
System functions
The automatic transmission has the following system functions:
- Adaptive transmission control
- Overlap control
- Starter inhibitor
- Parking lock
- Warming-up program
- Engine intervention
- Downshift inhibitor
- Reverse gear inhibitor
- Selector lever lock (shiftlock)
- Standstill decoupling
- Removal lock (interlock)
- Rock free from snow function
- Emergency program
Adaptive transmission control
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 4 -
As with automatic transmissions to date, the automatic transmissions GA6HP19Z and GA6HP26Z offer the
choice between a comfort program and a sport program.
The adaptive transmission control (component of electronic transmission control) adapts the shift
characteristics of the comfort program and sport program to the driver's wish and the driving situation. In both
programs, the adaptive transmission control changes from a basic map to a performance-orientated map, as
required:
•Comfort program in selector lever position "D"
The comfort program is based on 2 characteristic maps: The XE map (extreme economy) and the
E map (economy). The EGS control unit normally selects the economical XE map (= basic map). In
case of particular demands (e.g. load requirements), the system will change to the performanceorientated
E map. If the input signals change in favour of a more "gentle" driving style, the system will
change back to the more economical XE map.
•Sport program in selector lever position "M/S"
The sport program effects dynamic, sporty shift characteristics. In the sport program, there is the basic S
map (sport) and the performance-orientated XS map (extreme sport). If an extremely dynamic driving
style is called for, the system will change from the S map to the performance-orientated XS map.
The adaptive transmission control takes the following demands into account: driver type, driving uphill or
trailer towing, driving downhill, braking deceleration and automatic upshifts, winter program
•Adaptation to driver type
The adaptation to the driver type is made using the values kick-fast, cornering detection, brake evaluation
and constant-speed travel.
The driver-type adaptation is restarted each time the vehicle pulls away from a standstill.
Kick-fast
If the accelerator pedal is depressed rapidly, the shift program is changed accordingly. This is achieved
by the detected accelerator-pedal value being compared with threshold values in the EGS control unit.
The result of this comparison is the proposal of one of the two possible adaptation programs (XE or E in
comfort program, S or XS in sport program).
Cornering detection
Cornering detection reacts to the vehicle's lateral acceleration with an indirect adaptation to the driver
type. Lateral acceleration is considered an indirect statement of the preferred driving dynamics and does
not cause an immediate gearshift reaction (downshifts when cornering could negatively affect driving
stability).
The lateral acceleration is calculated by means of signals from the wheel speed sensors on the front and
rear axles and from the yaw rate and the road speed.
Brake evaluation
The braking action is evaluated in a similar way to "kick-fast".
The braking deceleration is measured and compared with threshold values in the EGS control unit. The
result of this comparison is the proposal of one of the two possible adaptation programs (XE or E in
comfort program, S or XS in sport program).
•Driving uphill or trailer towing
These functions are based on a comparison of actual car acceleration with a nominal value. From the
current engine operating situation, the acceleration with normal load on a level surface is calculated. If the
actual acceleration is significantly lower than the theoretical value, the function "Driving uphill or trailer
towing" is activated.
The associated shift maps allow a high-revving driving style. Undesirable upshifts and frequent
up/downshifts are eliminated or greatly reduced.
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 5 -
•Driving downhill
If the EGS control unit detects downhill driving, it will automatically shift down a gear if the vehicle's speed
picks up. This enhances the engine's braking effect. A downshift is only effected if the engine speed is
below the maximum speed of the lower gear.
The EGS control unit detects downhill driving on the basis of signals from the throttle valve potentiometer
(load), wheel speed sensor (road speed) and brake light switch (brake activation).
•Braking deceleration and automatic upshift
To decelerate the vehicle, the driver takes his foot from the accelerator pedal and applies the brake as
necessary. The gearshift map triggers an upshift when the throttle is closed. These gearshifts are not
needed in conjunction with brake applications as they prevent the engine's braking effect from being
utilised.
The intention to apply the brakes can often be anticipated from the rapid closure of the throttle to zero. If
such an action is detected, the upshift is suppressed for as long as the accelerator pedal is in the zero
position and the vehicle is in overrun mode.
•Winter program (only with selector lever in position "D")
The winter program is automatically activated if the drive wheels start to spin even at a low rate of
acceleration. The winter program provides enhanced traction by not using 1st gear and executes early
upshifts to prevent such reactions when load is changed. The winter program is deactivated if the wheels
do not spin for several seconds despite high drive torque.
Overlap control
Overlap control provides gentle shift characteristics as follows: With overlap control, several multi-plate
clutches are in use at the same time. Here, pressure is reduced in the active multi-plate clutch and at the
same time built up in the clutch that is about to be activated. The reduction and build-up of pressure is
maintained until a synchronised speed is reached. At this point, the hydraulic pressure for the multi-plate
clutch to be activated can be built up completely. Overlap control is active for all gearshifts from 1st to
6th gear and from 6th to 1st gear.
Starter inhibitor
It is only possible to start the engine when the selector lever is in position "P" or "N".
> E60 starter inhibitor
The CAS (Car Access System) evaluates the following signals from the EGS (electronic transmission
control) for the start:
•Selector lever position "P" or "N" as CAN message via the powertrain CAN
•Selector lever position "P" or "N" as signal via the direct wire
In principle, the CAN message is used. If this is faulty or invalid, the circuit switches to the signal from the
direct wire.

[Ricracing]

Osa 3 (miten tänne saa pdf:n kopioitua?)

> E53 starter inhibitor
The EWS (electronic immobiliser) evaluates the following signal from the EGS (electronic transmission
control) for the start:
•Selector lever position "P" or "N" as signal via the direct wire
Parking lock
The parking lock blocks the transmission output shaft and so prevents the vehicle from rolling. When the
vehicle is stationary, the parking lock is engaged purely mechanically via the selector lever (Bowden cable
from selector lever to mechatronics module). The parking lock is designed to provide a reliable brake on
gradients up to 32 .
Warming-up program
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 6 -
The warming-up program is activated after each engine start with the engine temperature lower than approx.
60 C. In the warming-up program, the automatic transmission remains in the perfomance-orientated XE or
XS map until a certain temperature has been reached. Gearshifts are made at higher engine speeds, allowing
the engine and catalytic converter to reach their operating temperatures more quickly.
Engine intervention
During the gearshift, the EGS control unit emits signals to influence the digital engine electronics (DME) or
digital diesel electronics (DDE).
The DME then retards the ignition timing for a few milliseconds.
The DDE reduces the fuel quantity for a few milliseconds by reducing the injection period.
This action briefly reduces the torque, improves shift quality, reduces the load on the transmission and
shortens the shifting time.
Downshift inhibitor
A downshift inhibitor prevents the transmission shifting to a lower gear until the engine speed is below the
maximum speed for the next gear down. The engine speed signal is transmitted by the DME/DDE to the EGS
control unit.
The downshift inhibitor prevents damage to the engine and transmission.
Reverse gear inhibitor
The reverse gear inhibitor electronically prevents reverse gear from being engaged when the vehicle is
moving forwards at speeds above 5 km/h (3 mph). When this speed is exceeded, the corresponding
solenoid valves are no longer actuated. This prevents multi-plate clutches B and D (for reverse gear) from
being charged.
Selector lever lock (shiftlock)
The selector lever is locked in positions "P" and "N" by an electromagnet. The electromagnet is actuated by
the EGS control unit. The selector lever lock is engaged when selector lever position "P" or "N" is detected
and the ignition (terminal 15) is ON. When the vehicle's speed is less than 5 km/h (3 mph), it is only possible
to move the selector lever from "P" or "N" when the brake is engaged and the engine speed is no higher
than 2500 rpm.
Standstill decoupling
Standstill decoupling of the torque converter decouples the torque converter from the power train when the
vehicle is stationary so that only a minimum of load is retained and fuel consumption is reduced. The
decoupling phase is realised by clutch A within the transmission being regulated, depending on the load
signal and output speed.
Removal lock (interlock)
The ignition lock is mechanically linked to the selector lever by a Bowden cable (as on the E38). The removal
lock only allows the ignition key to be removed when the selector lever is in position "P". The other way
around, the selector lever can only be moved from position "P" when the ignition key is in the ignition lock and
turned at least to ignition ON.
Rock free from snow function
To rock the vehicle free from snow, it is possible to shift between selector lever positions "D" and "R" without
the selector lever lock (effective in "N"). With the engine running, the gearshift must be completed within
0.5 seconds.
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 7 -
Emergency program
The emergency program is activated if the transmission management should fail or detect a malfunction that
could lead to critical driving conditions. In the emergency program, the vehicle remains operational, albeit with
limitations.
If the electronic transmission control fails (without current), the following forward gears can be engaged:
Failure in 1st-3rd gear ==> emergency 3rd gear
Failure in 4th-6th gear ==> emergency 5th gear
3rd gear will be engaged after a restart.
Operation
The different automatic transmission drive positions are selected with the selector lever.
When driving, there are the following possibilities:
- D = Automatic mode
When the selector lever is in position "D", gears are selected by the adaptive transmission control.
- DS = Automatic mode, sport program
When the selector lever is moved to the left from position "D" into the shift gate "M/S", the automatic
transmission's sport-orientated shift programs are activated. The display in the instrument cluster changes
from "D" to "DS".
- M1 to M6 = Steptronic
If the selector lever is in shift gate "M/S" and is briefly moved to "-" or "+", the electronic circuitry changes to
Steptronic and manual mode is activated. The display in the instrument cluster changes from "DS" to "M1" to
"M6".
In manual (Steptronic) mode, the transmission management will only execute upshifts or downshifts at
appropriate engine and road speeds. Gearshifts that would result in an excessively high or low engine speed
are suppressed. If an impermissible gearshift is requested, the display in the instrument cluster briefly
changes to the gear selected and then back to the current gear.
- Upshift only up to the gear required
A gear can be stored by repeatedly moving the selector lever to "+" or "-" and then holding it in the one-touch
position. The transmission management changes gear in sequence up (or down) to the required gear. The
selector lever must be held in position until the required gear has been reached.
Notes for service staff
Service staff should note the following points:
- Service notes: [more ...]
- Diagnostics: ---
- Encoding/programming: ---
- Car and Key Memory: ---
Subject to change.
SBT 6-speed automatic transmission E60 E53 BMW AG - TIS 09.04.2005 06:12
Issue status (02/2004) Valid only until next CD is issued Copyright Page - 8 -

[poke]

Miten nämä laatikot muuten kestää lastutusta? Käytetäänkö 535d:ssä ja 530d:ssä samoja laatikoita?

Kaivoin joku aika sitten ZF:n kotisivuilta tietoa: E60 530dA:ssa (ainakin 2004) on ZF 6HP26 joka on ZF:n mukaan mitoitettu kestämään 600Nm vääntö.

en tiedä onko sama aski 535dA:ssä. vääntöhän on tässä 580Nm.

[tjvirta]

Nykivää menoa E61 530DA

Moi,

Kyselen kokemuksia muista samanlaisista. Toimiiko muillakin seuraavasti vai lieneekö tuossa pelissä jotain vikaa?:

1. Hyvin rauhallisesti pintakaasulla kiihdytetäessä vaihteen vaihto on joskus todella töksähtävä. Periaatteessa rivakassa kiihdytyksessä toimii pääsääntöisesti hyvin.

2. Sport asento on ihan hanurista...kevyessäkin kiihdytyksessä pitää kierroksia korkealla hetken ja sitten jysäyttää isomman sisään niin että tuntuu. Sprot asentoa ei oikeasti voi pitää normaalissa liikenteessä päällä.

3. Kylmänä luistaa ihan simona. Ekat 5-10 kilsaa ei saa momentinmuunninta lukkoon ollenkaan

4. Muutenkin luistaa omaan makuun ihan liikaa - voi olla ominaisuus. Haluaisin enemmän pitävän laatikon. Nyt pitää painaa kaasua paljon ja laatikko luistaa hervottomasti. (esim jos vaihti hidastunut 70-> 60 ja vaihde 5 on pysynyt pelissä)

5. Pitäiskö laatikon olla "mukava". Tää on kaukana esim isäukon 200+tkm ajetusta E-mersusta.

Pitää vissiin käydä ottamassa koeajoon käytetty peli vaan testatakseen.

Autolla ajettu 113tkm.